Guide How To Flash Stock Firmware On Samsung Galaxy GALAXY S 3 GT-I9301I Using Odin V3.10.6.
Flash Stock Firmware On Samsung Galaxy GALAXY S 3 GT-I9301I. See you on android guide at guidebelajar, now, I will share a little guide how to flash a stock ROM on Samsung Galaxy GALAXY S 3 GT-I9301I using Odin V3.10.6. software. Samsung GALAXY S 3 GT-I9301I is the smartphone with 4,8 Inchi wide LCD, work on Android OS, v4.4.4 (KitKat) - GT-I9301I, with Qualcomm MSM8228 Snapdragon 400 Chipset, supported with Quad-core 1.4 GHz Cortex-A7 CPU and Adreno 305 GPU, combined with 1,5 GB of RAM and 8 MP of Main camera and 1,9 MP on secondary camera.
Flashing process in android Smartphone is like reinstall process on windows computer PC, with flash your Samsung Galaxy GALAXY S 3 GT-I9301I android device you can unbrick, downgrade, manually upgrade (instead of updating via OTA or Samsung Smart Switch), or restore Samsung's stock firmware instead of custom ROM. I make this guide just for you as user all Samsung galaxy GALAXY S 3 GT-I9301I variant.
You need to read this guide carefully, so you can get the best result flashing on your Samsung Galaxy GALAXY S 3 GT-I9301I. Cause you need to download necessary file, you must ensure that you have good internet connection in your computer device, this guide using a windows computer.
Initial Step To Flash Samsung Galaxy GALAXY S 3 GT-I9301I
Now, we have reached on beginning guide, so you must to do initial step to ensure everything run smoothly.
- Make sure your Samsung Galaxy GALAXY S 3 GT-I9301I battery is not in a low battery state, a minimum of 80%. If the battery runs out in the middle of the Root, it can lead to failure
- Always perform backup your important data before flashing process, Cause this process will delete or erase the data in memory.
- Make sure you have installed a Latest of Driver Samsung that support with your Smartphone, If you don't have, please download here
- Original USB cable driver for your Samsung Galaxy GALAXY S 3 GT-I9301I
- Download Samsung Smart Switch, Here
- Download Odin V3.10.6., Here
- Download Official firmware file for the model number of your device, download it from - SamMobile, or you can visit the other site, Here
Main Guide To Flash Samsung Galaxy GALAXY S 3 GT-I9301I
- You must download all necessary file.(Samsung USB driver or Smart Switch and Odin)
- Then you must install all driver or samsung smart switch to your computer or PC.
- Extraxt Odin V3.10.6. file on the destination folder.
- To download Samsung firmware you must visit this link, you can download specific firmware file for your device model number.you must Log In with your registered account on this website.
 |
| sammobile website Log In |
- On the row menu at the top of page, you can select firmware.
 |
| sammobile website Samsung Galaxy GALAXY S 3 GT-I9301I |
- Then you must enter in search bar with your phone model number.
 |
| sammobile website Samsung Galaxy GALAXY S 3 GT-I9301I |
- Then select your country.
 |
| sammobile website Samsung Galaxy GALAXY S 3 GT-I9301I |
- Then you click on appear link.
- Select regular download.
 |
| sammobile website Samsung Galaxy GALAXY S 3 GT-I9301I |
- And Download button again. Approximately file size is 1,6 GB
- Wait untill your file finish downloaded, after that you must extract all firmware file on specific folder on your computer.
- This is your file.
 |
| Stock Firmware Samsung Galaxy GALAXY S 3 GT-I9301I |
- Switch Off your Samsung Galaxy GALAXY S 3 GT-I9301I to start flashing process.
- Then, you must run Odin v3.10.6 by right click on Odin.exe and select Run as Administrator.
 |
| Flash Stock Firmware On Samsung Galaxy GALAXY S 3 GT-I9301I |
- When program is running, now you can click AP, and navigate to the *.tar or *.tar.md5 firmware file.
 |
| Flash Stock Firmware On Samsung Galaxy GALAXY S 3 GT-I9301I |
- Now your firmware file has been inserted in Odin3
 |
| Flash Stock Firmware On Samsung Galaxy GALAXY S 3 GT-I9301I |
- Then, Enter download mode your Samsung Galaxy GALAXY S 3 GT-I9301I by pressing and hold Volume Down Button + Home Button + Power Button. Hold and press all button untill your phone vibrate and LCD show menu.
 |
| Download Mode Samsung Galaxy GALAXY S 3 GT-I9301I |
- And you will see picture like this on your LCD screen.
 |
| Root Samsung Galaxy GALAXY S 3 GT-I9301I. |
On this mode, now you must connect your Samsung Galaxy GALAXY S 3 GT-I9301I to your PC / laptop using a USB cable. - After your phone connected, you will see a message appear that show your device added and there is info on the ID: COM at top left corner. Keep in mind for this COM vary depending on the PC / Laptop. Just Ignore all, in this picture you will see that your device is detected on (COM 5)
|
| Enter download mode samsung galaxy GALAXY S 3 GT-I9301I |
- Make sure re-partition is NOT ticked
- When everything already you can click Start Button. at the bottom left corner
- Just wait for the process to run about 2-5 minutes, and make sure there is no interference in this process.
- When complete it will display a notification PASS and your smartphoneSamsung Galaxy GALAXY S 3 GT-I9301I will automatically restart.
- Wait your device to boot up, it will take a while.
- When your Samsung Galaxy GALAXY S 3 GT-I9301I is ready to use, you can check your firmware update version by dial *#1234# on dial pad.
 |
| dial pad samsung galaxy GALAXY S 3 GT-I9301I |
- And you will see your new firmware version.
 |
| firmware version samsung galaxy GALAXY S 3 GT-I9301I |
- Finish.
Warning.
Never disconnect the USB cable while flashing process is running.
Install Samsung Mobile Driver or Samsung Smart Switch if you don't see a sign in Odin.
Flash your Samsung Galaxy GALAXY S 3 GT-I9301I device at your own risk.
Flashing firmwares which contains more than one *.tar.md5 file will wipe all data on internal storage. Flashing official/stock firmware won't increase the binary flash nor KNOX WARRANTY VOID counter and won't cancel the Samsung Galaxy GALAXY S 3 GT-I9301I device's warranty.
ADS HERE !!!