TWRP enables you to modify your system. Once you setup a custom recovery, you can root your device with SuperSU, flash mods, or even switch to a custom ROM like the popular CyanogenMod and more. A new build for the TWRP is available for Samsung Galaxy Tab S2 device and can be flashed easily using Odin. The TWRP build is compatible with SM-T710/715/810/815 variants of the device on both Android 5.0.2 and 5.1.1 Lollipop firmware. As CyanogenMod 12.1 build is available for the Tab S2, custom recovery is a must.
Also See - How to Install/Flash Stock Firmware on Samsung Galaxy Devices Using Odin
Requirements -
1.This tutorial is suitable only for Galaxy Tab S2 SM T710/715/810/815 variants only.
2. Download and Install Samsung Drivers On your PC
3. Download Odin Tool
4. Enable USB Debugging on your android phone.
DOWNLOAD LINKS-
LOLLIPOP 5.0.2 ONLY:
twrp_2.8.7.1_LL_5.0.2_t710
twrp_2.8.7.1_LL_5.0.2_t715
twrp_2.8.6.3_LL_5.0.2_t810
twrp_2.8.6.3_LL_5.0.2_t815
LOLLIPOP 5.1.1:
twrp_2.8.7.1_LL_5.1.1_t710
twrp_2.8.7.1_LL_5.1.1_t810
How to Install/Flash TWRP recovery on Galaxy Tab S2-
Step By Step Guide
1.Download TWRP Recovery file from the above and unzip the file.
2.Now Boot your Galaxy Tab S2 into Download Mode. To Do So, just power off your device and then press,Volume Down+Power+Home .
Press Volume Up now to continue to Download Mode.
3.Then Connect the phone to your PC via the use of USB cable and the ODIN application would notify an added message.
If not then check the USB cable or re-install Odin Flashing Tool
4. Choose AP or PDA in Odin Menu
and select the TWRP Recovery file (You have downloaded and Unzipped, the .tar extension).
Then ensure that the re-partition is not ticked in the Odin.
5.Now click on the start button to start the Flashing process.
Once the process is completed, you would notice the RESET or PASS message on the ODIN screen.
Then your device would automatically
boot into recovery mode
Done!!!Now your Galaxy Tab S2.
How to Root Samsung Galaxy Tab S2 via SuperSU (Credit:Chainfire ) -
Step By Step Guide
1. Download SuperSu Zip
2. Place the SuperSu zip file to the
internal memory of your Galaxy Tab S2.
3. Now Boot your device into recovery mode (press and hold Volume Down button +press Power button).
4.Choose install, and then select the SuperSU Zip file
5. Tap on Reboot system
Done!!! Your Samsung Galaxy Tab S2 is now rooted.
In case you get stuck at boot loop, go to recovery and wipe cache and data