How to reset Canon MP258 printer was not the same as how to reset the previous version of the canon printer canon ip ip canon 1980 and 2770. If the temporary reset done on previous Canon printers, the printer is able to be used, although the next day should be reset. But unlike what happened to the Canon MP258 which after performing the reset process should be followed by temporary permanent reset using software resetter.
How to reset Canon Pixma MP258 printer is based on the experience of the owner of the blog Learning Computer Science in improving a consumer printer problems can not print and flame orange lights flashing. After checking it turns out there is an error message P07 5B00. According to the information I get from browsing the Internet, code P07 Ink Absorber is Full error code means that the Canon MP258 printer must be reset using software resetter, and here is someone how to reset Canon Pixma MP258 printer.
Software resetter for Canon MP258 printers above can search in google, then install on the computer where the installation of the Canon MP258 printer.
- Turn off the printer (if you're On)
- Press and hold the Stop / Reset (not removable)
- Press the power button (also not removable)
- Remove the Stop / Reset, then press the Stop / Reset 2 times
- Remove the two buttons
- The printer driver installation process reset Canon MP258 printer.
- Run the software resetter Canon MP 258
- Click the Main (wait a moment, the printer prints a sheet of paper with printed D: 000.0)
- Click Clear EEPROM
- Click EEPROM (wait a second, back prints 1 sheet of paper with the code)
- Turn the printer off and on again
- The printer is ready for use
So How to reset Canon Pixma MP 258 of the Computer Science Learning blog. Hopefully I reset and fix the error on the Canon MP258 printer can be helpful for blog visitors to Cheater And Hacker In The World. Good luck.
ADS HERE !!!