Increase Internal Memory And RAM Of Samsung Galaxy Y Duos GT-S6102

How To Increase Internal Memory And RAM Of Samsung Galaxy Young Duos GT-S6102

Samsung Galaxy Y Duos is a great entry level android phone equipped with some pretty ok features.

In this Article I will show you guys how to increase the internal memory and RAM of your GT s6102.

Warning:

1. Rooting Voids Warranty
2. The methods given here are by experts
3. Try them at your own Risk.
4. Always make backup of any files required before proceeding further.

Downloads:

iDuos Kernel 1.3.1

CWM GT S6102 

Let’s Begin:

(Important –Swap and related A2SDGUI and Swapper are for RAM increasing process. For just increasing Internal memory, no need for swapper)

Step 1 : Partitioning Your SD Card For Link2SD

1. First Download Magic Partition Tool , which available for free
2. Make sure you use a Class 4 or higher SD card for this procedure.
3. Next, using Magic tool partition your SD card into two- FAT32, EXT2.( use three Partitions for Using Swapper for increasing RAM-Third partition is swap.)

Step 2: Install Custom Kernel

Custom kernel is for init.d support.

1. Download CWM and iDuos1.3.1 zip file and put in your sd card.
2. Now boot into stock recovery ( POWER+VOL UP+HOME)
3. Now Select “ Apply update from SD card”
4. First select the CWM zip file
5. Select “ Install zip from SD card”
6. Choose zip from SD card.
7. Now select the iDuos kernel zip file.
8. Next , continue with the installation.
9. After, press Back Key,, “reboot system now”

After finishing the installation and rebooting, check the kernel status on “About Phone” section from settings ..

Step 3: Root your Galaxy Y Duos GT S6102

The procedure for rooting Galaxy Y Duos has been posted earlier. Try this link to Root your device.-- How To Root GTS6102

Step 4: Install Link2SD on Your device.

1. Install Link2SD via Google play.
2. After installing link2sd go to Settings:--Applications:--Developments:--Now tick , “USB Debugging” and “ Allow Mock Locations”.
3. Run Link2sd.
4. Now it will ak you to select a file system for second partition. Choose” ext2”.
5. It will ask you to restart the device. Press “ OK”
6. After restarting , from link2sd choose “Settings”
7. Tick the “ Auto link” and Auto link notification”
8. Now set Install location as “ External”
9. Power Off.
10. Turn on the device and open link2sd to verify whether everything went okay.
11. From “Storage info” you can easily verify it.

Note: For SD cards Greater than 4 GB , use 1 GB+ for Second Partition

Step 4 : Install A2SDGUI-Darktremor A2SD GUI

1. Download A2SDGUI from Google Play
2. Install it
3. Run A2SDGUI

“If A2SDGUI can’t start; Download--dtapps2sd.zip

1. Reboot your device
2. Boot into stock recovery
3. Select “apply update from SD card”
4. Choose CWM zip :--Install zip from SD card.:--Choose zip from SD card:--dtapps2sd.zip:--Yes-Install:--Reboot System

4. Open A2SDGUI
5. From Apps2SD section and verify whether everything is activated or is on.
6. Be Extremely Careful or it will become a mess. Believe me.-“ Tick only “ Dalvik Cache on Internal memory”
7. Don’t tick anything else.
8. Check System info for Current RAM, Internal memory, SD card memory, etc.

Step 5: Increases your RAM

1. Download Swapper for Root from playstore.
2. Install swapper
3. Run Swapper Configuration -->Tick Active swap on boot--> Swap file position: SD card FAT Partition-->Swap fle size: 200-->Save
4. Wait till it finishes configuring.
5. Now run A2SDGUI-->System info
6. Check whether RAM has increased.

There You Go! You have successfully increased your Galaxy Y Duos’s internal memory and RAM.

ADS HERE !!!