Step 1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer then Skip this Step.
Step 2 : Download and extract the root files (for your device) your computer. After extracting you will be able to see the following files:
Important : Download Chainfire Root file of your device only.
Step 3: Now, Switch off your tablet.
Step 4 : After switching-off the phone, you need to boot into Download Mode. To boot into download mode Press and hold Volume Down and Power button at same time for 5-8 seconds until the samsung screen popups then release the power button but keep holding the Volume Down button until the download mode is appears.
Step 5: In the Download mode you will be able to see a Warning Yellow Triangle Sign . In this situation you have to press the Volume Up key to continue .
Step 6: Now, Open Odin3 (found in the extracted files, that you have downloaded in the Step#2 ) on your computer. Then connect your tablet to the computer.
Step 7: Once you have connected the tablet to the computer, Odin will automatically recognize the device and show “ Added” message at the lower-left panel.
Step 8: Once your device is detected by Odin,click on the PDA button and select the CF-Auto-Root.tar file (you have downloaded this file in step#2 ).
Step 9: Now, click on the Start button in Odin to begin the Flashing.
Step 10 : Flashing usually takes 30-50 seconds to complete the rooting process on your Samsung Device.Once Rooting process is completed you will be able to see a
Green Box with Pass written on it in Odin.
During this process device will re-boot automatically.
Step 11: Once you see, the Pass message in Odin, you can disconnect your Device from the computer.
Step 12: Now, to make sure you have
successfully rooted your Samsung device, open Applications Menu on your device and Find SuperSU App. If this app exist on your tablet then it means you have successfully rooted your device.
Congratulations!!!
ADS HERE !!!